1200s bits

Pull up a chair - let's talk Boxerbollox

Moderators: slparry, Gromit, Paul

User avatar
bluemanc100
Posts: 859
Joined: Fri Nov 24, 2006 6:56 pm
Location: Exiled in Stafford

1200s bits

Post by bluemanc100 »

anyone recommend a source for an Imberger Hugger and a good rear paddock stand for the 1200s?

ta
Steve Heywood
CTiD
NC24, NC30 Uk Spec, VFR 800 Vtec, BMW R850GS (now written off), BMW R1150GS, BMW R1100S Mamola BCR, Buell Ullysses, BMW R1200S, BMW R1100S 05 BCR , Gixxer K7 Thou - Mamola BCR with Ohlins
User avatar
Boxadog 2000
Member
Posts: 1908
Joined: Wed Feb 18, 2004 8:29 pm
Location: Looking over hedges

Post by Boxadog 2000 »

Try Sandbar on both counts.

Bob
User avatar
Boxered
Route Master
Posts: 3079
Joined: Sat Jun 26, 2004 4:44 pm
Location: Sintelinns

Post by Boxered »

For the rear hugger try www.sandbarcomposites.co.uk/ mention boxertrix for a discount.
as for rear stand, there are a few to choose from, I have the wunderlich stand from www.bmwbikebits.co.uk or www.nippynormans.com around £65 simple and works well enough.

or this german company,

http://cgi.ebay.co.uk/EINARM-MOTORRADHE ... m153.l1262

I bought their front stand, which is good quality and very reasonable at £28

but you should also think about the abba superbike stand
http://www.abbastands.co.uk/
I have one of these too :roll: and
coupled with a small bottle jack from halfords, will lift both front and rear to enable both wheels to be removed at once.

HTH

Steve
Well-weathered leather
Hot metal and oil
The scented country air
Sunlight on chrome
The blur of the landscape
Every nerve aware
Post Reply Previous topicNext topic