Depression ahead

Pull up a chair - let's talk Boxerbollox

Moderators: slparry, Gromit, Paul

Humbug
Member
Posts: 663
Joined: Wed Oct 28, 2015 6:06 pm
Location: Nottinghamshire

Depression ahead

Post by Humbug »

Got to hand over the front Ohlins shock for a rebuild on Monday. No bike for 10 days and going to miss a trackday at Cadwell with Chris Walker that I had planned to attend :cry: Would have deferred it but MOT man wants it done and the chap doing it will be tied up for 6 weeks after next week. Bet its sunny for the next two weeks. Poor me :sad11:
11 plate KTM SMT
User avatar
ianbcr
Member
Posts: 1480
Joined: Wed Mar 19, 2008 6:40 pm
Location: Walsall

Re: Depression ahead

Post by ianbcr »

I bet it aint. :D You will get another trackday.
Your born with a certain amount of heart beats, Don`t waste them on exercise. [smilie=rooster.gif]


04 boxer cup rep. Gone but not forgotten
99 tlr1000 (V twin) tricked.
Indian Roadmaster Elite
Grip Fast
Posts: 715
Joined: Sat Jan 14, 2012 6:15 pm
Location: North Bucks

Re: Depression ahead

Post by Grip Fast »

Who do you get to service your shock?

A few years ago, we returned home to find that our neighbour had started the renovation on their house. We knew it was about to happen, and we agreed that scaffolding could go on our property, against their wall. What I hadn't realised was that, with the scaffolding up, I couldn't get my bike out.

Three months - the entire summer - I couldn't get out on the bike. They were lovely neighbours, very good friends, and very apologetic, so I couldn't get upset with them. But three months!
Humbug
Member
Posts: 663
Joined: Wed Oct 28, 2015 6:06 pm
Location: Nottinghamshire

Re: Depression ahead

Post by Humbug »

I used Colin at 100% Suspension for the rear, he is near Mansfield http://www.100pcsuspension.co.uk/ and am using ETTO Motorcycles near Bingham in Notts for the front as recommended by my local workshop of Dan Hegarty in Bingham.
11 plate KTM SMT
User avatar
Boxered
Route Master
Posts: 3079
Joined: Sat Jun 26, 2004 4:44 pm
Location: Sintelinns

Re: Depression ahead

Post by Boxered »

Hi Herb, you can borrow my std front shock for the R12S if you don't want to be off the road, although you would need to get some bushings/spacers for it as it is a different bottom fit than the Ohlins for some reason. I just used it whilst my shocks were in for service, but I didn't ride with it fitted, I just wanted to be able to move the bike around the garage.
Let me know if you want to borrow it.

Steve
Well-weathered leather
Hot metal and oil
The scented country air
Sunlight on chrome
The blur of the landscape
Every nerve aware
Humbug
Member
Posts: 663
Joined: Wed Oct 28, 2015 6:06 pm
Location: Nottinghamshire

Re: Depression ahead

Post by Humbug »

Thanks for the offer Steve. Just been to see Mike Overy at Overland and Classic to book in for throttle body sync and he was recommending that while the bike is on stands and apart I should look at replacing or at least servicing the ball joint at the top due to the 80000 mileage. I think I may take his advice and do some of the fettling and care that I have neglected instead of wallowing in a pit of self pity.
Steve
11 plate KTM SMT
SP250
Posts: 985
Joined: Mon Sep 09, 2013 2:01 pm
Location: Shropshire

Re: Depression ahead

Post by SP250 »

When you've done all that refurb work, the bike will feel so much better on your next trackday. :D
John M
User avatar
Britisherspy
Posts: 499
Joined: Sat Apr 03, 2010 7:19 pm
Location: Lichfield

Re: Depression ahead

Post by Britisherspy »

Are you selling your track day place
Humbug
Member
Posts: 663
Joined: Wed Oct 28, 2015 6:06 pm
Location: Nottinghamshire

Re: Depression ahead

Post by Humbug »

Already gone i'm afraid. it will be a Triumph Tiger on track instead :|
11 plate KTM SMT
Humbug
Member
Posts: 663
Joined: Wed Oct 28, 2015 6:06 pm
Location: Nottinghamshire

Re: Depression ahead

Post by Humbug »

Well, shock is out and I must say its time for a rebuild! some parts look seriously unwell. Not a hard job as long as the front wheel is on the ground and the engine is well supported. Bottom bolt was easier than I thought it might be, didn't even need heat.
Time for a good inspection and clean down. Already found a dead bird in the front cowl at the side of the oil cooler :shock: Must have scooped it in at some point but never noticed, poor chap.
11 plate KTM SMT
Post Reply Previous topicNext topic