R11S - replacing ECU - anything to watch out for?

victorlaszlo · Post by **victorlaszlo** » Tue Jun 21, 2016 11:23 am

I've got my replacement ECU and the question is; is it as simple as popping the panels, lifting the tank, unplugging the old ECU and popping in the new, all while having the battery disconnected?

Or are there any watch-outs ?

Cheers Victor

dysondiver · Post by **dysondiver** » Tue Jul 26, 2016 10:00 am

make sure you put the new ecu in the right way round , i take it its just the chip , not the full module.
there is a dot on one corner ,,, take heed , and make sure its in nice and all legs are lined up before you press it home...

dysondiver · Post by **dysondiver** » Tue Jul 26, 2016 10:01 am

and of course re set the tps ,,, ign throt turn ign etc

victorlaszlo · Post by **victorlaszlo** » Tue Jul 26, 2016 12:29 pm

Already sorted out, it was the complete unit and only fitted one way

Thanks Victor

dysondiver · Post by **dysondiver** » Tue Jul 26, 2016 2:17 pm

remember the ign on , no start turn throttle reset too

victorlaszlo · Post by **victorlaszlo** » Tue Jul 26, 2016 7:21 pm

I actually never did that, thought I wouldn't need to considering the battery had been disconnected and it runs beautifully but will do it immediately

dysondiver · Post by **dysondiver** » Thu Jul 28, 2016 11:33 am

well with a new brain it cant do any harm

victorlaszlo · Post by **victorlaszlo** » Thu Jul 28, 2016 11:45 am

Did it, no difference noted, still works really great