The description is a bit confusing.I'm concerned about CanBus compatibility.
http://www.ebay.co.uk/itm/Xenon-HID-Lig ... 588b4be816
R1200S headlamp conversion
Moderators: slparry, Gromit, Paul
Nothing to worry about. It plugs into the headlight connectors. You may have make some alterations to the rear of reflector to get the HID bulb to fit. Find a suitable place to mount the ballast where there is enough airflow over it to cool. The best is to have the low beam on HID as it will be on all the time. The HID does take a while to start because the ballast needs to charge, so to speak. You do get the fast start ballasts which switches on within the second and is suitable for the main beam.
'Let me check my concernometer.'
-
- Posts: 296
- Joined: Thu Oct 18, 2012 1:10 pm
- Location: UK
-
- Posts: 296
- Joined: Thu Oct 18, 2012 1:10 pm
- Location: UK
http://www.danielsternlighting.com/prod ... ducts.html
read the hid conversion bit ,,, made me think
read the hid conversion bit ,,, made me think
its not a boxer , its a 180 degree v-twin