Noticed the exhaust note has changed on my R1100S.
Had a little look and notice that the pipe entering the can is fracturing at the join.
Guess I could maybe try to fix it with exhaust cement?
But if anyone happens to have a spare silencer knocking around I might be interested - happy with either a standard or aftermarket can.
Cheers.....
Dids wrote:
Guess I could maybe try to fix it with exhaust cement?
)
I've had two fail on mine in 15 or is it 16 years... one like you describe , the other fractured completely while riding the bike , successful repair would be quite difficult I think.
_________________
Nigel
Keep smiling, it makes people wonder what you've been up to!
1999 R1100s (mandarin) '
2018 DL 250V Strom
2019 CB125F Honda.
MZ301 Saxon Fun ( currently retired)
'03 Bullet 65 project..
I've had two fail on mine in 15 or is it 16 years... one like you describe , the other fractured completely while riding the bike , successful repair would be quite difficult I think.
I have just bought a replacement silencer (Cheers Feralworks)
Was thinking of having the original one repaired - I have a friend who is pretty handy at welding.
Just wondered, Nab 301, if you think a weld repair would be viable?
Just wondered, Nab 301, if you think a weld repair would be viable?
Short answer is no, or rather long term successful repair is no . I think as mentioned by brighter people than me on here, it's a mix of mild steel and stainless pipes plus add carbon contamination = poor weld ? Found these threads below
Well documented repair in his thread , viewtopic.php?f=4&t=24247&hilit=weld+exhaust
Keep smiling, it makes people wonder what you've been up to!
1999 R1100s (mandarin) '
2018 DL 250V Strom
2019 CB125F Honda.
MZ301 Saxon Fun ( currently retired)
'03 Bullet 65 project..
I'm sure someone from this parish bought a Laser direct from Holland. I believe they had to wait a while for delivery but it wasn't that expensive (but I may be wrong on this as I usually am)
'15 R1200GS TE
'06 R1200S
'04 BCR
Yam SR 500 long term restoration
wanna win the lottery and ride my bike
I checked on the Laser website & it looks like they do still sell a silencer for the R1100S, but no photo & costs almost 600 Euros.
I think I might go the route of looking for a second hand aftermarket silencer.
Soooooooooooooo..........
If anyone has an aftermarket silencer for a R1100S I'd be interested.
Cheers....
Check out the Fuel range - made in Kendal UK, start at £175 and come with a lifetime guarantee.
Couple of race team bike builders I know reckon they are good kit. https://www.fuelexhausts.com/range
Check out the Fuel range - made in Kendal UK, start at £175 and come with a lifetime guarantee.
Couple of race team bike builders I know reckon they are good kit. https://www.fuelexhausts.com/range
Cheers John,
Kendal is just 20 miles away & would have been really handy.
However I checked & double checked their website & they don't seem to do a silencer for the R1100S.
Am I missing something?
You would just have to buy a generic can with the right inlet diameter and length for the 11s and make up your own brackets or cut off the ones on the original pipes. But, you can get a lot of fabrication done for the money you save on their prices.
