Oxygen sensor lead

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: slparry, Gromit, Paul

Post Reply Previous topicNext topic
boxerscott
Posts: 3724
Joined: Sat Apr 21, 2007 5:07 pm
Location: scottish borders
Contact:
Contact boxerscott

Oxygen sensor lead

Post by boxerscott »

Can anyone describe or show where the lead routes? bike been in bits for so long I have forgotten where the correct route is :?

Edit R 1100 BCR
Fiat Panda.
Fiat Scudo (with speedblock, pipe carrier, reversing sensors, reversing camera, tow bar, some new rust and Fake Plumber logo)


started out with nothing, still have most of it left.
Top
User avatar
Blackal
Posts: 8261
Joined: Fri Jul 29, 2005 7:53 pm

Post by Blackal »

Is the route not shown on the maint manual?


From memory - it goes up the right side to the forward edge of the airbox, then forward up the right side of the battery and connects in 6" above there?

Al :)
If I am ever on life support - Unplug me......
Then plug me back in..........

See if that works ..... :?
Top
boxerscott
Posts: 3724
Joined: Sat Apr 21, 2007 5:07 pm
Location: scottish borders
Contact:
Contact boxerscott

Post by boxerscott »

Does not show it in BMW repair manual, but yes it comes up rhs of c frame leg over top of air box along and above telelever up into socket. I put it out of the way behind the drain hoses. Think that was where I had it before.

I was being lazy asking, quite logical really. Must be something to do with the refreshment I had last evening :)
Fiat Panda.
Fiat Scudo (with speedblock, pipe carrier, reversing sensors, reversing camera, tow bar, some new rust and Fake Plumber logo)


started out with nothing, still have most of it left.
Top
Post Reply Previous topicNext topic

Return to “Boxertech”