1200S Spark Plug Covers

DaveH · Post by **DaveH** » Wed Aug 22, 2012 10:06 am

I'm after a set of spark plug covers for the 12S as I want to cut them down to fit into the grooves behind the CF head covers to tidy up the spark plug wiring.

It appears that they are a different part number to other 1200 models.

Does anyone know the physical difference between the 12S and other covers.??

I suspect the bit after the 90 degree bend (ie back towards the engine block) is likely to be the same and that's the bit I'm after.

robj · Post by **robj** » Sat Aug 25, 2012 3:21 pm

The spark plug covers on a 1200RT are a straight swap, so can't see why there should be a different part number!

I've got a right hand 'S' cover if you want it, free to a good home! It's got a couple of scuffs on it, but if your going to cut it down anyway....

DaveH · Post by **DaveH** » Sun Aug 26, 2012 7:45 am

robj wrote:The spark plug covers on a 1200RT are a straight swap, so can't see why there should be a different part number!

I've got a right hand 'S' cover if you want it, free to a good home! It's got a couple of scuffs on it, but if your going to cut it down anyway....

Ended up cutting mine down anyway - new ones aren't that expensive and I can't see me selling the bike anytime soon.

Thanks for the offer though...

|