Carbon fairing panels (Update)

el-nicko · Post by **el-nicko** » Mon Jun 25, 2012 12:53 am

Just scored this on ebay

. The 'ad' says, 'This was a very expensive accessory from BMW'. Does any body know anything about it/them?

Blackal · Post by **Blackal** » Mon Jun 25, 2012 1:27 am

£77.00

notoriusb.e.n · Post by **notoriusb.e.n** » Mon Jun 25, 2012 5:42 am

its a belly pan. I have the same one. I think its actually an offical BMW part too - as mine comes with BMW stamped mounts and brackets.

Did they include all the mounts and bits?

Blackal · Post by **Blackal** » Mon Jun 25, 2012 5:49 am

No mounts with it, from memory (of the ebay ad)

Al

el-nicko · Post by **el-nicko** » Mon Jun 25, 2012 12:11 pm

Blackal wrote:£77.00

£69.00+p. No fittings but I thort that was a 'snip'. Bet they cost a lot more than that when BMW were floggin 'em. If they turn out to actualy BE CF (as advertised) I'll be well chuffed. It won't take me long to knock-up some brackets next winter when the bikes off the road. Has anybody got any pic's or drawings so I can get started?

Gromit · Post by **Gromit** » Mon Jun 25, 2012 12:14 pm

I had one on my first 1100S - it was around £200 at the time (2000). Quite a nice item, and better than the bigger BCR-style ones in some ways as it helps to protect the front of the engine.

skiddy boxers · Post by **skiddy boxers** » Mon Jun 25, 2012 12:37 pm

Look at this thread and you'll find my method of fixing posted by Blackal

viewtopic.php?t=15771&highlight=bellypan+fixings

el-nicko · Post by **el-nicko** » Mon Jun 25, 2012 12:44 pm

skiddy boxers wrote:Look at this thread and you'll find my method of fixing posted by Blackal

viewtopic.php?t=15771&highlight=bellypan+fixings

Brilliant!

Just what I need. Cheers mate.

notoriusb.e.n · Post by **notoriusb.e.n** » Mon Jun 25, 2012 1:00 pm

proper blue weave CF - made by BMW. Same stuff as they use on the tank panel, heel guards and front fairing - I believe it all came fitted as standard on the "light" model. That front bottom peice does get a bit melted by the headers though from my experience. But it does a good job of keeping them covered up so you only have to polish up the bits that are exposed.

el-nicko · Post by **el-nicko** » Mon Jun 25, 2012 1:08 pm

notoriusb.e.n wrote:proper blue weave CF - made by BMW. Same stuff as they use on the tank panel, heel guards and front fairing - I believe it all came fitted as standard on the "light" model. That front bottom peice does get a bit melted by the headers though from my experience. But it does a good job of keeping them covered up so you only have to polish up the bits that are exposed.

That's interesting mate. Don't suppose you have any part numbers?

notoriusb.e.n · Post by **notoriusb.e.n** » Mon Jun 25, 2012 5:59 pm

Sorry no, mine came as it was with all the carbony bits already fittted. Rainbow motorcycles at rotherham have all the carbon bits in stock though, if you were after a nosy.

ned1 · Post by **ned1** » Mon Jun 25, 2012 6:39 pm

el-nicko

If your belly pan fits with the centre stand fitted to the bike the rear bracket drawing will not work because it
uses the mounting holes for the stand, I would also have a close look at the front to make sure it will work as
the brackets drawings are for a boxer type belly pan

Just my two pence worth.

Ned

TIM EVANS · Post by **TIM EVANS** » Mon Jun 25, 2012 7:24 pm

http://www.ebay.de/itm/Orig-BMW-CARBON- ... 739wt_1219

pics on there of all the fittings

el-nicko · Post by **el-nicko** » Mon Jun 25, 2012 10:17 pm

Cheers Tim. Looks like I can retain my centre stand

el-nicko · Post by **el-nicko** » Wed Jul 11, 2012 1:03 pm

After identifying (useing the RealOEM parts list) all the bits I needed to fit it to the bike I put a red cicle around everything in the diagram as they arrived:-

I ordered them up from Motorworks an they arrived 3 days later:-

£155.00 UOCH!

Total inc P+P and a 10x90m (No 12) sourced from ebay; £235. Will be fitting as soon as pos.

www.boxertrix.com

Carbon fairing panels (Update)

Carbon fairing panels (Update)

Carbon panels(update)