Got a technical query? Found another 0.02bhp? Ask/tell the world.
Moderators: slparry , Gromit , Paul
tripe
Posts: 669 Joined: Sat Aug 20, 2005 1:25 pmLocation: West London
Contact:
Post
by tripe Sat Jan 26, 2008 5:26 pm
my bike lives outside all year round and without taking the seat off and tucking the socket away does anyone have any suggestions as to the best way of protecting the autocom socket from the elements that I propose to dangle from under the seat?
Boxadog 2000
Member
Posts: 1908 Joined: Wed Feb 18, 2004 8:29 pmLocation: Looking over hedges
Post
by Boxadog 2000 Sat Jan 26, 2008 6:42 pm
Autocom state that the socket on the end of the fly lead should not be covered as that promotes condensation.
The socket will be ok to the elements.
Me I just make sure that mine is dangleing downwards
Oh and the ocassional smear of silicon grease
Bob
tripe
Posts: 669 Joined: Sat Aug 20, 2005 1:25 pmLocation: West London
Contact:
Post
by tripe Sat Jan 26, 2008 6:44 pm
top tip
I should have realised a bit of silicon grease will stop it turning green and crusty when exposed to the elements
