Page 1 of 1
mounting the horn
Posted: Sat Jan 20, 2007 4:07 pm
by tripe
I've got a stebel magnum that I want to attach in a different spot, any suggestions and with some sort of off the shelf bracket?
Henry
Posted: Sat Jan 20, 2007 4:51 pm
by Boxadog 2000
Where do you want to mount it
All you need are two pieces of flat steel strip about 0.75mm thick and 25mm wide by ? length
Posted: Sat Jan 20, 2007 5:14 pm
by izustu
I would recomend fitting on the right hand side of the fairing, tucked where the BMW badge is fixed to the fairing stay. There are holes there where you can bolt a small bracket to fit the horn. There is plenty of room for a bigger horn. You will need to run longer wiring around the relay box, but it is a simple job.
I ended up doing this because I had Ohlins fitted and lost space towards top yoke.
Si
Posted: Sun Jan 21, 2007 6:41 pm
by cc mac
I fitted mine on the other side of the horn bracket and it fitted ok.