Page 1 of 2
Motronic
Posted: Sun Mar 19, 2006 8:17 am
by boxerpan
Anyone know how often the Motronic samples the mix ? I was told once every 500 revs - if so this sounds like a very basic device and maybe a candidte for a MOTRONICectomy come next winter.
Posted: Sun Mar 19, 2006 9:09 pm
by twodear
I believe the Motronic controls everything including ignition and injection. How would the Motronic controller be eliminated without going to standard carbs and a points breaker ignition?
Anyway, sampling has to be done constantly to adjust for the variation of loads from just riding down the road, regardless of RPM. The sampling you're referring to might be related to setpoints on the injection/ignition map.
Posted: Sun Mar 19, 2006 10:15 pm
by boxerpan
Bingo.....nice pair of carbs with proper ignition that you can advance........sounds like just the answer
The sampling cannot be done constantly as the motronic isn't some sort of super computer - the question I was asking was how frequently it samples the mix and is it sampling it often enough ?
Posted: Mon Mar 20, 2006 6:06 pm
by Boxadog 2000
Well as you know I fitted a techclusion fi box to my S when i had it and was told by PDQ that it sampled the mix every 500 rpm which was the same as the Motronic was also told that a Power Commander sampled evey 200 rpm.
Bob
Posted: Mon Mar 20, 2006 8:11 pm
by boxerpan
Thanks Bob, this may explain why the seat of the pans dyno in Birmingham recons it spins up quicker with the PC.
Posted: Mon Mar 20, 2006 8:21 pm
by Boxadog 2000
Sorry dont understand what you mean seat of the pants dyno!
Does the dyno you are using have real time co and mixture sampling?
I guess that it would be JHP who again I guess have the experiance in setting up the map to nothing other than spot on, it is my understanding that with a PC you can get infinatley variable adjustment?
Did you get the new lambda sensor with your PC
I would expect an extra 2/3 bhp at the rear wheel and absolutley no surge and perfect fuelling if you dont have perfect fuelling they need to do more dyno runs and re-mapping.
Bob
Posted: Mon Mar 20, 2006 8:50 pm
by winger
Hi Bob
The Power Commander comes with a Bosch lamber sensor,fitted mine a couple of weeks ago with strict instructions not to use it, till both mine and Lloyds had been on the dyno for a cutom map!!! started it up after i'd fitted it,the rev counter needle nearly jumped of the dial!!!.
After looking on the Pelican at what the Yanks were running kit wise,thought sod it,i'll run it up the road as their(P/C) stock program can't be to bad.
Up to 4 thou seemed pretty normal after that it went ballistic,needle went round the dial like a dose of salts!!!!,it picks up VERY quick,Johns mob are at Brands on sunday so i'm hopeing we can drop the bikes of the following tuesday,it just wasn't practical this week as they all came back from Albecete sat night and between this morning and thurs morning have 4 engines to changes and all the other preparation!!!
So can we have a engines dyno'd is likely to met with a blunt 'Piss off'!!!!
Posted: Tue Mar 21, 2006 6:58 pm
by Boxadog 2000
Patience young Skywalker.
Oh and do as the man says, basic PC maps are shite
Posted: Tue Mar 21, 2006 10:43 pm
by gus
New helmet,they have a deal on rx7 corsair at J&S at the moment £299 or a power commander?Spent loads already this week on new discs, a new braided rear hose and Billet Q/A throttle.Decisions decisions!
I like what i,m hearing about the PC and people are yet to have them fully tuned.
gus
Posted: Wed Mar 22, 2006 7:37 am
by boxerpan
A helmet may be more important if you are going to ride Frankensteins' baby

Posted: Wed Mar 22, 2006 8:27 am
by winger
With a black visor!!
Posted: Thu Mar 23, 2006 9:39 am
by gus
Yeah i,m creating a bastardised beast alright!
May need to borrow a side fairing to craate a mould if thats OK?
Chris
Oh yeah!

That suns a killer.And it looks cool too!
I hear J&S are moving to Carnells old premises,so will go down when they open.Hein gericke were selling the same helmet for £450.
gus
Posted: Thu Mar 23, 2006 11:49 am
by winger
Blimey thats a smart move by J+S,somewhere for bacon butties again!!
Side panel!!! i'll have a look whats in stock!!
Posted: Thu Mar 23, 2006 8:04 pm
by boxerpan
gus wrote:New helmet,they have a deal on rx7 corsair at J&S at the moment £299
You may need to be quick, Nottingham J&S only had Gibernau reps left and my guess is you wouldn't be seen dead in one of those

Posted: Thu Mar 23, 2006 8:48 pm
by Archie
boxerpan wrote:gus wrote:New helmet,they have a deal on rx7 corsair at J&S at the moment £299
You may need to be quick, Nottingham J&S only had Gibernau reps left and my guess is you wouldn't be seen dead in one of those

I dunno, it is a crasher's hat, isn't it?
Me, I never crash, not since the last time......