www.boxertrix.com

Posted: **Mon Sep 05, 2005 4:52 pm**

Oxygen sensor

BLOODY hell it seems tight
are there any gotchas please anyone? Im trying to take this race system off for Gus's mate

Posted: **Mon Sep 05, 2005 7:39 pm**

Yep that'd be about right. Plenty of duck-oil or plus gas etc etc. Then go for a run to get it up to temp. It'll ease right out then, just mind you don't burn the crap out your forearm whilst removing it. ( Ask me how I know about that ! )

HTH

Toodle Pip

Posted: **Mon Sep 05, 2005 7:50 pm**

thanks very m,uch. i will have to put it back together and run the bike up. its wayyy too tight even with enough force to start to knurl the nut.
Will have another go but am almost in the frame of mind just to leave the damned thing on

Posted: **Mon Sep 05, 2005 9:23 pm**

You'll be wanting that 2' long 24mm ring spanner and Jason's best twatting hammer. Job done

Posted: **Tue Sep 06, 2005 12:19 am**

Use a heat gun(paint stripper) about a tenner from B+Q,getting Gus's of was the worsed one i'd come across but with plenty of heat it soon came of.

Chris

Posted: **Tue Sep 06, 2005 7:23 am**

Gromit wrote:You'll be wanting that 2' long 24mm ring spanner and Jason's best twatting hammer. Job done

I was just about to mention the application of a severe twatting myself

Posted: **Tue Sep 06, 2005 7:47 am**

I'd just like to thank you all for all the great technical and mechanical tips I pick up on this site...... adds to tool shopping list - twatting hammer

Andy

Posted: **Tue Sep 06, 2005 7:51 am**

Jason M wrote:
I was just about to mention the application of a severe twatting myself

Applied with surgical precision, as always