Page 2 of 2
Re: Pannier lock wafers.
Posted: Tue Jul 24, 2018 4:22 pm
by milleplod
Thanks very much for the info Steve, appreciated. Unfortunately, its got me beaten!

I've just had another...sweltering...hour in the garage, to no avail. I'll have a go again in the morning, but if its not out by lunchtime (!), I'll leave it for a few days to save my sanity!
Pete
Re: Pannier lock wafers.
Posted: Wed Jul 25, 2018 5:33 am
by Mr Charrington
https://youtu.be/9TEwD6nEpgk
Maybe this video could be helpfull
He works on a side pannier but as he say it the same on a top box also .
Good luck !

Re: Pannier lock wafers.
Posted: Wed Jul 25, 2018 1:59 pm
by milleplod
Got the little b****rd!!

It took about 10 mins - once I knocked up the tool as per the dimensions in Steve's link, made up an inspection lamp small enough to drop into the inspection hole, and put my extra-strong reading glasses on....all became clear!
Anyway, I'm just off to post it Steve, hopefully you'll have it by tomorrow.
Pete
Re: Pannier lock wafers.
Posted: Wed Jul 25, 2018 2:10 pm
by slparry
milleplod wrote:Got the little b****rd!!

It took about 10 mins - once I knocked up the tool as per the dimensions in Steve's link, made up an inspection lamp small enough to drop into the inspection hole, and put my extra-strong reading glasses on....all became clear!
Anyway, I'm just off to post it Steve, hopefully you'll have it by tomorrow.
Pete
Fantastic, they either pop quickly like that or take forever