Bike blown over - new cylinder head cover reqd

Blackal · Post by **Blackal** » Thu Oct 01, 2015 3:50 pm

Here's the thread.............

viewtopic.php?t=20454&highlight=cover

masha · Post by **masha** » Thu Oct 01, 2015 4:18 pm

Thanks Very much appreciate the thread

I;ve found a manufacturer in Wales willing to take a mould from mine and manufacture a test pair in Polycarbonate, that might work also and offer some protection, would be cheap and easy to colour-code.

Gromit · Post by **Gromit** » Thu Oct 01, 2015 4:26 pm

masha wrote:
I;ve found a manufacturer in Wales willing to take a mould from mine and manufacture a test pair in Polycarbonate, that might work also and offer some protection, would be cheap and easy to colour-code.

Result! Nice one, Masha - will be interested to see what they come up with.

DPG · Post by **DPG** » Thu Oct 01, 2015 7:34 pm

Gromit wrote:
masha wrote:
I;ve found a manufacturer in Wales willing to take a mould from mine and manufacture a test pair in Polycarbonate, that might work also and offer some protection, would be cheap and easy to colour-code.
Result! Nice one, Masha - will be interested to see what they come up with.

Me too... I'd take a set of those if it comes to fruition.

masha · Post by **masha** » Fri Oct 02, 2015 7:57 am

I'll keep you posted - might be a few weeks but with a suitable size batch should be cost effective, cheap material and easily replaced.

bikerboy · Post by **bikerboy** » Sat Nov 21, 2015 2:25 pm

I have a spare cover in brandnew condition, But does Not have magnesium written on it!, I bought for my 1100s. But never used

Dog Tyred · Post by **Dog Tyred** » Thu Nov 26, 2015 6:16 pm

bikerboy wrote:I have a spare cover in brandnew condition, But does Not have magnesium written on it!, I bought for my 1100s. But never used

Does it have the threaded holes either side of the spark plug hole for the carbon cover attachment? If so it is for a BCR and I might be interested if the price is right

DT