battery isolation switch?

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: Gromit, Paul, slparry

john-freda
Posts: 3
Joined: Thu Oct 29, 2020 7:47 am

battery isolation switch?

Postby john-freda » Wed Jan 06, 2021 12:51 pm

Hi, I have a recently purchased R1100S, my question is regarding the battery, as I have to work away, and my garage has no power my bikes are often left for months at a time. On my other bikes I normally disconnect the batteries, obviously on the BMW this isn't really an option so I have thought of putting an isolation switch on the battery, has anyone done this? if so what switch did you use, and where did you find the best place to mount it? Any advice much appreciated, thanks. John.

dave the german
Member
Posts: 3614
Joined: Tue Nov 01, 2005 4:35 am
Location: North East

Re: battery isolation switch?

Postby dave the german » Wed Jan 06, 2021 5:02 pm

Welcome. Have you thought about a solar powered optimate? I believe they are no use to recharge a discharged battery but are good enough to use as a top up charger
'15 R1200GS TE
'06 R1200S
'04 BCR
Yam SR 500 long term restoration
wanna win the lottery and ride my bike

User avatar
Al
Member
Posts: 1367
Joined: Thu Nov 03, 2005 9:56 am
Location: Devon

Re: battery isolation switch?

Postby Al » Wed Jan 06, 2021 5:49 pm

What is the difference between an isolater switch and disconnecting or removing it, it’s not as if the 1100s has on board computers etc, as I have a garage remote from my house mine is out of my GS at the moment, I just do a TPS reset and set the clock when I connect it.

Al.
White/red BMW R1200R Sport
Shiny Red Honda Civic
Shiny Silver MR2 vvti Roadster. Going to be sold
White Peugeot Boxer Camper Conversion.
Battle scarred Suzuki Burgman 125,(Mrs Als) going to be sold
Suzuki VanVan 125

User avatar
Topcat
Member
Posts: 562
Joined: Thu Aug 25, 2005 2:22 pm
Location: Somerset

Re: battery isolation switch?

Postby Topcat » Thu Jan 07, 2021 11:10 am

We had a similar problem with a bike fitted with a tracker so needed to keep the battery connected but it would flatten in a few days. In the end we bought a leisure battery - designed to be discharged and re charged many more times than a car battery - fitted a charging lead to the bike and made a plug connection for the big battery. Just plug it in and leave it, unplug and ride off. Even with the tracker it lasts about 4 mths no trouble. Get the biggest battery you can and some terminal clamps, works a treat!

It seems to be more 'gentle' than having the bike on an Opitmate or similar, you are not putting a current into the battery, just making the bike battery much bigger. Someone from here warned about connecting a flat bike battery to a fully charged leisure one so we just make sure both are at a similar state of charge and no problems so far. Also, disconnect before you start the bike, not sure what would happen to the thin connection leads. Not worth taking a chance.

Hope that helps.

Leisure battery with terminal clamps

IMG_1705.jpeg
IMG_1705.jpeg (863.88 KiB) Viewed 5009 times


Socket from bike battery (charging lead) connected to plug from leisure battery

IMG_1704.jpeg
IMG_1704.jpeg (670.35 KiB) Viewed 5009 times


Socket similar to that connected to the bike battery

IMG_1706.jpeg
IMG_1706.jpeg (950.79 KiB) Viewed 5009 times

SP250
Posts: 982
Joined: Mon Sep 09, 2013 2:01 pm
Location: Shropshire

Re: battery isolation switch?

Postby SP250 » Fri Jan 08, 2021 8:29 am

All good options and the last one would be to get an isolation switch from one of the car / rallying parts suppliers like Demon Tweeks or here http://www.vehiclewiringproducts.co.uk/ ... -isolators and a couple of feet of large diameter cable. Split the positive battery lead and run the switch or plug/socket to under the seat (alongside the top of the shock maybe). You only need to take the seat off to switch the battery on and off then.
John M

john-freda
Posts: 3
Joined: Thu Oct 29, 2020 7:47 am

Re: battery isolation switch?

Postby john-freda » Fri Jan 08, 2021 6:52 pm

Thanks for all the replies, Al, the battery is such a pain to get to that's why I thought of a remote isolation switch, like the idea of a remote battery though, there is already a optimate lead fitted, so I'll probably go for this option, thanks to all.

Mitch1100
Member
Posts: 995
Joined: Tue Apr 23, 2013 9:00 am
Location: Tasmania

Re: battery isolation switch?

Postby Mitch1100 » Sat Jan 09, 2021 11:03 pm

Get a Lithium-ion battery :wink:
2009 HP2 Sport...sold
2006 R1200s with yellow rim tape
2008 Ducati Monster S4RS Tricolore..sold
2004 R1100s BoxerCup Replika..sold
2006 Subaru WRX STI S204 #318/600


Return to “Boxertech”

Who is online

Users browsing this forum: No registered users and 49 guests