R12S Torque values
Posted: Tue Apr 16, 2019 5:37 pm
Doing service tomorrow but have misplaced the table of torque values, anyone who can help completing the below?
Oil drain plug torque 32 Nm (is this for engine oil?)
Oil filter 11 Nm on the filter.
Oil filler plug
Oil gear filler plug
Oil gear drain plug
Front brake calliper 30 Nm
From brake grub screw 7 Nm
Front brake calliper bleed screw 5 Nm
Rear brake calliper 24 Nm
Rear brake calliper bleed screw 5 Nm
Wheel quick release axle in axle holder 50 Nm
Wheel quick release axle clamp screws 19 Nm
Wheel rear bolts 60 Nm
Final drive cover to final drive housing (m8x30) 30 Nm
Final drive oil filler plug in final drive housing (with O-ring 11.2x1.8, without M12x1) 20 Nm
Paralever reaction link to final drive housing 42 Nm (replace nut)
Paralever reaction link to frame 42 Nm (replace screws)
Cyl head cover to cyl head M6 x 72mm, tighten diagonally in sequence to a final torque of 10Nm
Valve lock nuts
Spark plugs
In bold missing values, anything additional would be great!
Oil drain plug torque 32 Nm (is this for engine oil?)
Oil filter 11 Nm on the filter.
Oil filler plug
Oil gear filler plug
Oil gear drain plug
Front brake calliper 30 Nm
From brake grub screw 7 Nm
Front brake calliper bleed screw 5 Nm
Rear brake calliper 24 Nm
Rear brake calliper bleed screw 5 Nm
Wheel quick release axle in axle holder 50 Nm
Wheel quick release axle clamp screws 19 Nm
Wheel rear bolts 60 Nm
Final drive cover to final drive housing (m8x30) 30 Nm
Final drive oil filler plug in final drive housing (with O-ring 11.2x1.8, without M12x1) 20 Nm
Paralever reaction link to final drive housing 42 Nm (replace nut)
Paralever reaction link to frame 42 Nm (replace screws)
Cyl head cover to cyl head M6 x 72mm, tighten diagonally in sequence to a final torque of 10Nm
Valve lock nuts
Spark plugs
In bold missing values, anything additional would be great!