Induct Pipe, my findings!

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: Gromit, Paul, slparry

Post Reply
User avatar
South_Oz
Posts: 69
Joined: Fri Nov 02, 2012 11:52 pm

Postby South_Oz » Sat Nov 03, 2012 12:49 am

New member here, haven't got a chance to introduce myself yet as I found this site looking for pics of Lennies old bike.
I was at the Australian Motogp last weekend and stumbled (literally) on what I thought was Lennies old bike from what i've read about it.

Image

Image

The new owner knew it was modified but didn't know by who. I had a bit of a look over it, found a fuel pressure regulator of a K series and the tubes welded through the tank so I think it is the real deal. I didn't get a chance to hear it running.

Now I better go introduce myself.

Dave.
Top
User avatar
Dai wiskers
Member
Posts: 1262
Joined: Mon Jul 09, 2012 7:21 pm
Location: Caerphilly

Postby Dai wiskers » Sat Nov 03, 2012 12:27 pm

That does look like Mark's old bike

Well spotted Dai
My bike shines when it rains!!!!!!!!!!!!!!!!!

Dyslexic Dai


Steptoe
http://www.gsshop.biz/


Dan Cata
http://boxer-upgrades.webs.com/


Lennie
http://www.boxer-performance.com/index.html
Top
lennie
Posts: 85
Joined: Fri Sep 15, 2006 10:35 pm
Location: Australia

Postby lennie » Tue Nov 06, 2012 9:18 pm

Sure is my old bike. I hope to buy it back one day. :D

Did the new owner look happy.
Top
User avatar
South_Oz
Posts: 69
Joined: Fri Nov 02, 2012 11:52 pm

Postby South_Oz » Tue Nov 06, 2012 10:20 pm

Yep he was very happy with the bike. We talked bikes for a few hours. When I asked where the seat was he said it was in his tent. He didn't want it to get wet as it had a sheepskin cover.
What cams did you fit and what sort of power improvement did it give Lennie?

Dave
99 R11s Pov. Spec.
92 RGV250 Race Spec. Australian Land Speed Record Holder MPS/G 250 131 MPH http://www.dlra.org.au/index.htm
85 RZ250 Yamaha Std.
85 RZ250 Yamaha Spares.
84 RZ250 Yamaha Banshee 350 top end.
84 RZ250 Yamaha Rebuilding for sale.
Top
lennie
Posts: 85
Joined: Fri Sep 15, 2006 10:35 pm
Location: Australia

Postby lennie » Mon Nov 12, 2012 11:09 pm

South_Oz,

I had cams reground by a guy in Sydney and after fitting I advanced 9 degrees for good results.

The cams were ground for midrange again and I can't remember the exact numbers for the improvements.
Top
User avatar
el-nicko
Member
Posts: 1562
Joined: Tue Mar 13, 2012 3:04 pm
Location: Nick from HEREFORDSHIRE, The Oceanian province of Airstrip One.

Postby el-nicko » Tue Nov 13, 2012 2:58 pm

I wonder; Originaly, did BMW mean to use that left-hand fairing apperture as the intake? :?
.

Image

Mr. Spock is my role model so be advised; I possess no (discernible) sense of humour.

It's all VFR (DCT) round here now. STILL missing my 1100s tho.
Top
User avatar
Mike B
Member
Posts: 566
Joined: Mon Mar 29, 2010 7:16 pm
Location: Liversedge, West Yorks
Contact:
Contact Mike B

Postby Mike B » Tue Nov 13, 2012 9:39 pm

people say so, but in my opinion that hole is to keep the electronics cool under the tank.
There are only two things in life that are "Priceless"
Time & Health
Everything else can be bought or stolen.
Top
User avatar
el-nicko
Member
Posts: 1562
Joined: Tue Mar 13, 2012 3:04 pm
Location: Nick from HEREFORDSHIRE, The Oceanian province of Airstrip One.

Postby el-nicko » Tue Nov 13, 2012 10:22 pm

Mike B wrote:people say so, but in my opinion that hole is to keep the electronics cool under the tank.
:thumbup:
.



Image



Mr. Spock is my role model so be advised; I possess no (discernible) sense of humour.



It's all VFR (DCT) round here now. STILL missing my 1100s tho.
Top
Post Reply

Return to “Boxertech”

Who is online

Users browsing this forum: No registered users and 48 guests