Pyramid Hugger for R1100s
Posted: Mon Jun 06, 2016 10:05 am
www.boxertrix.com
The UK-based forum for BMW's sportiest Boxer motorcycles
http://www.boxertrix.com/phpBB2/
Pyramid Hugger for R1100s
Page 1 of 1
Posted: Mon Jun 06, 2016 4:04 pm
I think there should be 2, what are really, 2 17mm hex bars (about 2 inches long) that are threaded to bolt the calliper on and the end of the bar is threaded to take a 6mm counter sunk bolt. There should be countersunk washers for the 6mm bolts. Without the threaded bar/bolt the hugger won't sit central over the tyre - at least that's how mine fits. If anyone from here is interested in it I may be able to help out with, what appears to be some of the missing bits
Posted: Mon Jun 06, 2016 4:13 pm
Ah-hah! 
Didn't examine the listing too carefully.
Yes - there are two hex-posts that have to be the right length.
Al
Didn't examine the listing too carefully.
Yes - there are two hex-posts that have to be the right length.
Al
Posted: Mon Jun 06, 2016 7:35 pm
to be fair Al, it doesn't say anything about the mounting bolts - they were the reason for my rear calliper problems (my lack of maintenance really )
)