DIY gear indicator

As it says; what you've done to your bike and how it helped make it better.

Moderators: Gromit, Paul, slparry

Are you insterested into buying a kit?

 
Total votes: 0

User avatar
buzzz90
Posts: 165
Joined: Thu Aug 25, 2011 7:17 am
Location: France

Re: DIY gear indicator

Postby buzzz90 » Mon Aug 09, 2021 10:54 am

Test with direct sunlight :
https://youtu.be/J4na_mzURW4
R1100S / VIN ZA82517 : Image

Humbug
Member
Posts: 637
Joined: Wed Oct 28, 2015 6:06 pm
Location: Nottinghamshire

Re: DIY gear indicator

Postby Humbug » Mon Aug 09, 2021 8:07 pm

Looks great!
10 KTM RC8

User avatar
Paul
Wanna buy a sticker mister?
Posts: 2858
Joined: Mon Feb 16, 2004 8:44 pm
Location: Boxertrix Towers, Norfolk
Contact:

Re: DIY gear indicator

Postby Paul » Tue Aug 10, 2021 8:55 am

Nice work Buzz90. If I still had an 1100S, I'd order one without hesitation.

Paul
You really need only two tools: WD-40 and duct tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the tape.

FuzzyEdges
Posts: 22
Joined: Mon May 03, 2021 10:39 am
Location: Monmouthshire

Re: DIY gear indicator

Postby FuzzyEdges » Fri Aug 20, 2021 5:29 pm

That looks great. Ready to order when you're ready!

FE.

User avatar
Hay Ewe^
Posts: 186
Joined: Sat Aug 27, 2016 9:59 pm
Location: Far North Queensland - AUS

Re: DIY gear indicator

Postby Hay Ewe^ » Tue Sep 21, 2021 11:57 pm

This looks GREAT!
I shall do some more reading but it looks like it will fill a gap on my project
(1100GS and I dont think to use the normal RID as I am re-wiring the whole thing)
Thanks!

User avatar
buzzz90
Posts: 165
Joined: Thu Aug 25, 2011 7:17 am
Location: France

Re: DIY gear indicator

Postby buzzz90 » Wed Sep 22, 2021 5:35 am

Thanks for all your kind comments.
Sorry for the lack of recent news. After a few weeks of use, I'm working to improve the displayed information.
I shall try to improve direct sunlight readability as well, but that would sacrifice to the global integration of the module...
R1100S / VIN ZA82517 : Image

User avatar
buzzz90
Posts: 165
Joined: Thu Aug 25, 2011 7:17 am
Location: France

Re: DIY gear indicator

Postby buzzz90 » Tue Oct 19, 2021 4:46 pm

Since the last news, the hardware has nearly not evolved (apart from the AR lens).
The software however has changed a lot and especially the display layout.
I mainly wanted the voltage and oil temperature information to be more visible.
I have worked on the logic for the adaptative brigthness and a few other features, but I'll show that in an incoming video.
Let me know if you have remarks on the UI or wishes.
Image
R1100S / VIN ZA82517 : Image

User avatar
jeznewsome
Posts: 333
Joined: Sat Aug 04, 2012 7:30 am
Location: Preston, Lancs

Re: DIY gear indicator

Postby jeznewsome » Tue Oct 19, 2021 5:04 pm

Looking good fella

Humbug
Member
Posts: 637
Joined: Wed Oct 28, 2015 6:06 pm
Location: Nottinghamshire

Re: DIY gear indicator

Postby Humbug » Tue Oct 19, 2021 7:11 pm

Looking great
10 KTM RC8

dave the german
Member
Posts: 3614
Joined: Tue Nov 01, 2005 4:35 am
Location: North East

Re: DIY gear indicator

Postby dave the german » Wed Oct 20, 2021 12:44 pm

too clever by half!! Looks good
'15 R1200GS TE
'06 R1200S
'04 BCR
Yam SR 500 long term restoration
wanna win the lottery and ride my bike

User avatar
buzzz90
Posts: 165
Joined: Thu Aug 25, 2011 7:17 am
Location: France

Re: DIY gear indicator

Postby buzzz90 » Sat Oct 23, 2021 4:47 am

A video to show the new features in detail.
Don't be surprised by the values of temperature or by the way the gears change; there is no sensor attached to this prototype except the ambient light sensor.

https://youtu.be/X_0TTxl9lps
R1100S / VIN ZA82517 : Image

User avatar
ianc53
Member
Posts: 701
Joined: Thu Feb 19, 2004 5:22 pm
Location: The Kingdom of Fife

Re: DIY gear indicator

Postby ianc53 » Sun Oct 24, 2021 5:37 pm

Very impressive, just wish I still had the 1100S :D
Motorrad R1250RS SE 2023
Blue R100RS 1980
Suzuki GT250B 1977

User avatar
buzzz90
Posts: 165
Joined: Thu Aug 25, 2011 7:17 am
Location: France

Re: DIY gear indicator

Postby buzzz90 » Sat Dec 25, 2021 10:47 am

Hi everyone.
First, I wanted to wish you all a merry Christmas.
I'm sorry for the lack of recent news on my R1100S gear indicator project.
I have worked hard and a few things are fully defined now (electronics, software, design of the display module,...). However, due to the pandemic, I'm still waiting on critical components like the front lenses.
Stay tuned in 2022 if you want one...

Image
R1100S / VIN ZA82517 : Image

User avatar
buzzz90
Posts: 165
Joined: Thu Aug 25, 2011 7:17 am
Location: France

Re: DIY gear indicator

Postby buzzz90 » Tue Jan 18, 2022 4:56 pm

R1100S / VIN ZA82517 : Image

User avatar
ianc53
Member
Posts: 701
Joined: Thu Feb 19, 2004 5:22 pm
Location: The Kingdom of Fife

Re: DIY gear indicator

Postby ianc53 » Tue Jan 18, 2022 5:32 pm

Very impressive, if I still had a R1100S I'd definitely want one!

All the best

Ian
Motorrad R1250RS SE 2023
Blue R100RS 1980
Suzuki GT250B 1977


Return to “Boxerspex”

Who is online

Users browsing this forum: No registered users and 13 guests