www.boxertrix.com

The reason I ask is 'motobins' show an original style - made by Venhill - original length - and wanted this to an increased length. I spoke with Venhills today and they only offered the twin line set up not seemingly aware of the other type ...

Thanks Paul/Bob, Bob would you recommend a twin line kit (from the master cylinder) ...race I think they call it ? Or something to replicate the original style ? Thanks Andrew

Hi all, I trial fitted my barback. As suspected longer hose needed (built 2000, non ABS) bars fitted below yoke from factory. First issue when re assembling back to standard to enable use of bike I vacuum bled. Could then not get a good feel at lever - just felt odd. On very slow test on drive the b...

Update - I decided to replace both front and rear caliper fixings - all from BMW. So new fronts all good - rears however supplied with allen head not torx as per original. Also they are an inferior quality (8.8 v 10.9). Anyone come across this before ?

That's interesting mine being 8mm - thanks

Thanks all - 40 it is then

Original fixing - steel . I must double check the torque figure ...can anybody confirm ? Thanks

Hi, just re torqued front caliper bolt (40 NM) it felt odd then sheared ! Now ordered a complete new set from dealer and I am going to replace them all. Any thoughts as to why it failed ? Is 40NM correct ? Doubt it has been over tightened in the past (first time been off the bike as far as I am awar...

I see regularly see a red 1100S coming in the opposite direction to me and wonder is the owner a member. I think a 'spotted' section might a good idea...any thoughts ?

Ahh OK , Thankyou for taking the time to reply - Andrew

Just to be clear - do I need a straight oil or an EP ? Thanks again- Andrew

Hi, another newbie question. I have searched previous questions...still unsure ...Advice please ! exact oil you guys recommend R1100S gearbox and diff. ? Thankyou - help much appreciated. Andrew

Sold - Thank you

Many thanks - ordered!

Hi all, new owner here. Just going through recent purchase- low mileage (4000 mile) bike - however has been off the road 7 years. I have noticed gearbox oil breather (I presume) looks deteriorated ...do I need to replace ? Thank you