Search found 185 matches

by roadburner
Sun Oct 23, 2016 6:45 pm
Forum: Boxertech
Topic: Gear box Clutch issue.
Replies: 12
Views: 10025

Neil, splines on the clutch are fine, it's just a build up of moly grease ar the back that makes them look less worn. Got most of it back together tiday after losing about 3 hours fighting to get the prop shaft on. Long story but my mate that helped me didn't make sure it was properly engaged so had...
by roadburner
Wed Oct 19, 2016 5:33 pm
Forum: Boxerbanter
Topic: dyno
Replies: 3
Views: 3916

That's not a bad curve. But the fuelling does seem a bit out. Typical emissions flat spots.
by roadburner
Wed Oct 19, 2016 5:30 pm
Forum: Bits'n'bobs for sale
Topic: Wanted- gear box selector drum
Replies: 5
Views: 4738

In urgent need if it for Friday, as don't any other bikes on the road due to crashing my ducati so bit the bullet and got one from motorworks. Box being rebuild tomorrow, do hopefully be back on the road by the weekend. Total cost was £130 for all the bearings seals and a Guaranteed second hand drum...
by roadburner
Tue Oct 18, 2016 6:38 pm
Forum: Bits'n'bobs for sale
Topic: Wanted- gear box selector drum
Replies: 5
Views: 4738

Yep that's the one. £250 for a new one, that's silly money, and aboit 70 for a second hand one with motorworks seriously skint this week so was hoping to get one cheaper. Already spent £60 on new bearings and am desperate to get the bike back on the road. It's not an essential for the rebuild at the...
by roadburner
Tue Oct 18, 2016 5:52 pm
Forum: Boxerbanter
Topic: And so it begins...
Replies: 24
Views: 11248

I often see people going through on a " dark amber" just after its changed, but that's unreal. Yes I might have chanced it in the past when there's a set of temporary lights at a roadworks which are totally unnecessary but that's just taking the piss.
by roadburner
Tue Oct 18, 2016 5:48 pm
Forum: Bits'n'bobs for sale
Topic: Wanted- gear box selector drum
Replies: 5
Views: 4738

Wanted- gear box selector drum

As per title, urgently in need of the selector drum/ transmission roller for a 2005 6 speed box. Can't find a single one for sale in the UK , but loads in the states.
Many thanks.
by roadburner
Mon Oct 17, 2016 5:45 pm
Forum: Boxertech
Topic: Gear box Clutch issue.
Replies: 12
Views: 10025

Todays update. bloke near me wasn't in today so had a go myself. Heat gun on the case and got it to about 130C output shaft slid out but the intermediate shaft took a load of brute force with a slide hammer to get out. Anyway upshot is that the inter shaft bearing is shagged, so easy fix, I'll order...
by roadburner
Sun Oct 16, 2016 11:19 pm
Forum: Humour
Topic: A quiz for intelectuals
Replies: 1
Views: 3418

What do you get when you cross a joke with a rhetorical question?
by roadburner
Sun Oct 16, 2016 11:16 pm
Forum: Bits'n'bobs for sale
Topic: Wanted - hi fi amp etc
Replies: 4
Views: 4635

I've got a fat man blue amp and some jbl studio monitors lying around if it's any good to you.
Amp Is a modern valve amp complete with Bluetooth. Only down side is it only has 2 analogue inputs.
Also have a record deck pre amp too.
by roadburner
Sat Oct 15, 2016 4:44 pm
Forum: Boxertech
Topic: Gear box Clutch issue.
Replies: 12
Views: 10025

Quickly is a relative term. Took about 3.5 hours which I thought was pretty good. Nope, haven't got the clutch off yet, my back had had enough by then. So I'll look at that tomorrow. I originally thought that if it's the clutch it'll be a cheap fix,and then I looked at the price of a complete clutc...
by roadburner
Fri Oct 14, 2016 8:49 pm
Forum: Boxertech
Topic: Gear box Clutch issue.
Replies: 12
Views: 10025

Quickly is a relative term. Took about 3.5 hours which I thought was pretty good. Nope, haven't got the clutch off yet, my back had had enough by then. So I'll look at that tomorrow. I originally thought that if it's the clutch it'll be a cheap fix,and then I looked at the price of a complete clutch...
by roadburner
Fri Oct 14, 2016 5:44 pm
Forum: Boxertech
Topic: Gear box Clutch issue.
Replies: 12
Views: 10025

Gear box Clutch issue.

Had an awful noise starting to come from the bike last time out, Whining/grinding noise when running and in neutral that went when i pulled the clutch in. Difficult to tell how bad it was whilst riding due to not being able to hear much over the sound of the full lazer system, but when in gear on th...
by roadburner
Wed Sep 28, 2016 2:21 pm
Forum: Boxertech
Topic: New battery blues
Replies: 6
Views: 5368

Might be too obvious, but have you charged it up first. I've seen loads of new batteries with very little initial charge on them
by roadburner
Wed Sep 28, 2016 2:19 pm
Forum: Bits'n'bobs for sale
Topic: John's Chip for R1100S
Replies: 7
Views: 6574

If anyone else is interested, I've got another spare one for sale. Exact same reason :D
same price etc.
Dual spark
by roadburner
Fri Sep 16, 2016 8:01 pm
Forum: Boxerbanter
Topic: BCR SAGA TIME
Replies: 22
Views: 12145

I had a k1200r and absolutely loved it. Fuelling is easily sorted with a little wire in plug thing(about £20). panniers are on the small side unless expanded and then very wide- apparently you can get a full fave helmet in them, but I never managed it. Economy is superb-easy to get 50mpg, nothing to...

Go to advanced search