www.boxertrix.com

You can make due with a piece of stout string.
Just make a loop with the string of about 2 inches across.
Remove the wiring connector at the top of the stick coil.
Slide the loop of string under the stick coil - make sure the loop is entirely under the stick coil.
Put a stick, ratchet wrench handle ...

If your left hand fuse box contains 8 fuses, fuse number 3 is a 15 amp fuse.
The decal on the fuse box says the fuse is 10 amps but the actual fuse in the fuse box is 15 amps.

You can now get fuel injector adapters with and without matched fuel injectors that convert R1200 to both the old R1100xx and the newer R1150xx, R1100S.

The vendor is Injector-Rehab.com out of New Jersey, USA.
I have no affiliation with them other than I have ordered from them in the past and have ...

I would start with the starter motor.
The starter motor is exposed to a lot of clutch and spline dust.
On some of the old starter motors, the magnets came un-done.
On some of the old starter motors, the armature cover got loose and shorted the starter motor.

Take it off , have a look and clean it ...

Iphone/Ipad for BMW bikes , EUR 84.90
http://www.ivini-tech.de/en/adapter/ios-bmw/bikes-package/a-1013/#description

Android for BMW bikes, EUR EUR 69.90
http://www.ivini-tech.de/en/adapter/android-bmw/bikes-package/a-1016/#description

Sorry folks.
No support for R1100xx and R1150xx.
No support for ...

Although the tolerance on some of the H1 HID bulbs are not exact,
most of the H1 HID kits used the same H1 bulb base.

When installing mine, I know I had to squeeze the retainer metal clip a lot , before it was in.

Both right front and right rear turn indicators work together.
Both left front and left rear turn indicators work together.

If you still have an LED in the front, it might still cause a fast blink even though you've changed the rear to an incandescent.

I have this www.whitelights.eu unit in my 2004 R1100S .
This flasher/turn signal relay DOES NOT cancel.
Another feature is that it was built to utilize LED bulbs so that you do not get the fast blinking from the stock OEM relay.


http://www.whitelights.eu/images/product_images/info_images/841_0 ...